Ah-/preset-counter pe6020

  • Display 6-digit 7-segment LED
  • Shuntsignal 0 … 60mV for 0A … Inom
  • Dimensions (B x H x T) 92 x 45 x 157mm
  • Supply voltage 230V or 110V AC +/-10%; 50 / 60cps
 Ah-/preset-counter pe6020

Ah meter
The Ah-meter pe6010 can be used with all plating
rectifiers. The case is designed to be built into front
panels, desktop casings or control units.
In the standard version the Ah-meter pe6010 (without
preset counter function) is to be connected to a shunt
signal of 0 ... 60mV for 0A ... Inom. Optional the Ahmeter
pe6020 can be designed for other counting rates
(e.g. gramme/gold, gramme/silver).
The Ah-meter is equipped with an internal power
supply 230V AC. The unit is controlled by a microprocessor.
When the supply voltage is switched off,
the actual counting rate and all settings are stored.

Preset counter
The “Mode” button switches the operating between Ahmeter
and Preset counter. The value for a certain
amount of current can now be entered. The counter
counts down from this value to zero. If the counter
reaches zero, a dosage impulse is given out by an
internal potential free relay contact.